ROOTing – Build V6.3.6 WW, Android 4.4.2

THX!! Mehrdad595

Rooting the Fonepad 7 -ME372CG – K00E:
http://forum.xda-developers.com/showthread.php?t=2697931
Copied to here from there, with thanks:

Default [ROOT] Asus FonePad 7 / K00E / ME372CG
ONLY YOU ARE RESPONSIBLE FOR WHAT YOU DO WITH YOUR FONEPAD

Introduction:
1.Download THIS package ( Thanks to ricky310711 ) and extract it in a folder
2.Download Intel USB Driver For Android Devices (mirror) and install it
3.Download root file attached to next post which is same as your build number.
4.Go to “DROIDBOOT” (turn off tablet,press power+vol up together till u enter it!)
5.copy root zip file you have downloaded at step 3 to extracted folder.
6.open “OPEN.cmd” and enter this:

Code:
fastboot flash update rootx.x.x.zip

(x.x.x is your build number)
7.after flashing got complete tablet will be restarted and it shows “Installing System Update”
8.grats,u got root access now!

If u faced bootloop on v6.3.6 build (android 4.4.2) then do a factory reset in droidboot
thanks to fussel323 for making root file
if its usefull press thanks and rate it ***** ! 

UNDOING THE KITKAT UPGRADE
http://forum.xda-developers.com/showthread.php?t=2800023
Copied to here from there:

 

For this you will need
1. 5.2.2 Stock Raw Image which can be found here
2. Partial Update from 5.2.2 to 5.2.5 which can be found here

So lets start
1. Download and copy ME372CG_all_WW_user_V5.2.2.raw file to your external SD card
2. Turn Off your FonePad 7 and start Droid Boot (press and hold Volume up button and Power Button)
3. Select SD Download
4. Now your FonePad 7 will reboot and start flashing Build 5.2.2
5. After that when you are done refer to @MEHRDAD595 Rooting Thread here
6. After Rooting Download Partial Update file and rename it to dlpkgfile (make sure there is no extension)
7. Using Root Browser copy this file to /cache and make a new file in /cache/recovery named “command” (no quotes) edit it using text editor and enter following

Code:
--update_package=/cache/dlpkgfile

8. After that connect your FonePad 7 to your computer in USB Debugging Mode.
9. Using open.cmd (yes the one you used while rooting) enter following command

Code:
adb reboot recovery

10. Now your FonePad 7 will reboot and start updating. Once this is complete you will get Build 5.2.5.

Enjoy

*Note: There is no other way to roll back without root (There is might be a way but I need tester)

One thought on “ROOTing – Build V6.3.6 WW, Android 4.4.2

Leave a Reply

Your email address will not be published. Required fields are marked *


five − = 3